You’ll be amazed at the range of materials you can fix with Tear-Aid Type A repair tape. Gives you a durable, flexible, airtight, watertight, puncture-resistant patch. No muss, no fuss, no mess.

• The matte finish polyurethane tape is exceptionally tough and abrasion resistant. It stretches and springs back without losing its grip.
• The aggressive adhesive on the tape is formulated for a high strength bond to a wide variety of surfaces. It doesn’t turn gummy in the heat.
• Repairs holes and tears on Pennel Orca®, Hypalon, rubber, most fabrics, fiberglass, nylon, most plastics (including polyethylene, polypropylene and polyurethane), non-oiled leather, aluminum, and stainless steel.
• Available in patches or rolls
• The see-through tape works with all colors and won’t discolor over time.
• It’s easy to use. Cut the patch to shape, clean the surface to be repaired, and stick it on. No muss, no fuss, no mess.
• Type A Tear Aid is not recommended for Vinyl or PVC. For these materials, use Type B Tear-Aid

Tear Aid Type B

Sticks, stubs, thorns and horns make holes and tears in your PVC and vinyl gear. Tear-Aid Patch – Type B is your answer; It’s durable, flexible, airtight and watertight. Perfect for your repair kit.

• The Tear-Aid Type B is for vinyl/PVC ONLY. The oils in these materials and coatings require the special adhesive in Type B.
• Patching is oh so easy. Select the right size patch for the job. Clean the repair surface with an alcohol prep pad or rubbing alcohol. When the area is dry, just peel the backing off the Tear-Aid patch and stick it on. No mess, no muss, no fuss.
• The unique adhesive on Type B resists the oils in vinyl that cause other adhesives to soften and turn gummy in sunlight.
• Available in rolls
• Patches are airtight and watertight, even under pressure when stretched.
• The patches are see-through, so the color of your gear shows right through.
• It’s UV resistant and conforms to irregular surfaces.
• For materials other than vinyl/PVC, use Type A Tear-Aid

Stabond 2-part adhesive is the recommended glue for field repairs on AIRE and Outcast boats. It is available in 2 convenient sizes.

*Not available to ship to Alaska, Hawaii or Canada. Must go UPS Ground

WARNING: This product can expose you to Toluene, which is known to the State of California to cause cancer and birth defects or other reproductive harm. More about California Proposition 65 

*Does not include Needle

The AIRE Raft Repair Needle is a handy tool for your repair kit. Use it to sew up large gashes before applying a patch.

* Does not include thread.

If the inside components of your B7 valve are leaking and cleaning the inside of the valve does not fix the problem then it is time to rebuild the valve. Unfortunately, because all of the air holding components of the B7 are inside the air chambers you cannot simply replace the valve, it will have to be rebuilt. This kit gives you everything you’ll need to rebuild the inside of the valve. Follow the link below to learn How To Rebuild a B7 Valve.

Component kits for the Leafield C7 and D7 Valves

• C7 Includes components for the inflation/deflation plunger (core seal, spindle and stainless steel spring).
• D7 Includes spare valve cap o-ring and components for the inflation/deflation plunger (core seal, spindle and stainless steel spring)